Silicone-fluid lubricants are commonly used to coat medical devices including disposable needles that are used for delivering medication or withdrawing fluids, and for suturing in medical procedures. The lubricious coating on the needle surface reduces drag forces, allowing the needle to go through the skin more easily, ultimately making it less painful for the patient.
Where medical grade silicone fluid polydimethylsiloxane lubricants is provided in concentrated form., medical device manufacturers need a carrier fluid to dilute the concentrated silicone lubricant so a very thin film of silicone can be applied to an article by dipping or spraying.
The ideal carrier fluid must have good solubility, so that the silicone oil will dilute and naturally disperse in the carrier. This allows the user to apply the dilution to a surface by spraying or dipping. The carrier fluid should also be fast drying so when it evaporates, a thin, consistent film of silicone remains as a uniform coating on the treated part.
Nonflammable carrier fluid options have always been a preferred method of application, providing low risk of fire, especially important for high-volume production facilities. While original nonflammable carrier options were low-risk, they were regulated out of production due to environmental issues. The rapidly changing regulatory landscape has made it increasingly difficult to specify nonflammable carrier fluids. Nonflammable options have all but disappeared from the market and many medical device manufacturers are considering flammable options to replace them. Both aliphatic and aromatic hydrocarbons are two commonly used flammable carrier fluid options, but these can be difficult to use especially in high-volume production facilities because of the flammability risk. In an environment that is already prone to static discharge, it takes just one spark to start a fire due to flammable carrier fluids’ vapors. The engineering controls required to mitigate risks associated with handling flammable liquids are very expensive, and often difficult for health and safety officers to support.
With increased focus on changing health and safety concerns, the tide is turning away from flammable options due to their high risk factors. A new, nonflammable formula is available from MicroCare Medical that provides a safe, reliable and ideal drop-in replacement to the widely used flammable carriers such as hexane or toluene. Suitable for use in the European Union and US and meeting all REACH requirements, the MicroCare Universal Carrier Fluid is a custom-blended carrier fluid with good solubility and excellent materials compatibility that has been optimised to dilute and apply medical grade polydimethylsiloxane lubricants to medical devices.