binder, a supplier of industrial circular connectors, is offering its 709- and 719-series products with a overmoulding for the straight versions.
binder
The connectors featuring snap-in locking are characterised by high retention forces – measured against their size – but can still be quickly mated and unmated. These properties are beneficial in metrology and medical-device-technology applications, for example, which are subject to enhanced functional safety requirements.
Safety properties improved
Both in instrumentation and in medical technology, it is often important to protect devices and their interfaces against contamination from the environment, so binder engineers have developed a triangular overmoulding design that features no gaps, grooves, or undercuts allowing dirt to accumulate. This increases the applications' resistance to contamination. Furthermore, the straight product variants are easy to handle, making one-handed mating and unmating safe and comfortable.
When developing the new overmoulding, the product designers at binder maintained the properties at the same level as the previous version, despite the new design without special kink protection. The kink protection ensures that the strands do not break under mechanical stress - when the cable kinks. This was proven in advance by means of bending tests.
Product series at a glance
The 709 and 719 snap-in series offer users the benefits of a fast and secure locking system with high retention forces. The products are available as male and female cable connectors with or without strain relief. The 3- to 5-pole series have been designed for wire gauges up to 0.25 mm2 (up to AWG 24) and soldering or dip soldering termination. The IP40-protected products achieve a mechanical lifespan of 100 and more mating cycles.