Johannes Razenböck, project manager - medical and Christoph Lhota, vice president of the medical business unit, Engel Austria explain how intelligent assistance systems can be integrated into validation strategies for medical products.
Using assistance systems with injection moulding opens up new possibilities for higher process accuracy and product quality. Such intelligent software solutions adapt the process parameters to the current conditions cycle by cycle. An example is iQ weight control by Engel, which automatically compensates in real time for external influences such as fluctuations in the raw material. The challenge for medical technology, however, is to integrate this dynamic process control into the validation process. Different approaches to the validation process were examined and a procedure derived which makes it possible to validate processes with iQ weight control in compliance with both EN-ISO and Food and Drug Administration (FDA).
For medical products, the notified bodies in Europe and the United States of America require detailed documentation during the entire product development, process planning and manufacturing process. The requirements for this can be found in the European standard "EN ISO 13485:2016 – Quality management systems for medical devices" and in the American FDA regulation "21 CFR Part 820 – Quality systems regulations". Both regulations stipulate that a company must validate critical production processes whose results cannot be verified by subsequent monitoring or measurement. This includes injection moulding processes in mass production, where 100-percent inline inspection is usually not advisable. However, the implementation of the validation is not specified either in the American regulation or in the European standard. Only the tasks to be performed by the manufacturer are recorded in various directives and guidelines.
It is common practice to validate injection moulding processes on the basis of machine parameters. However, changing ambient conditions that influence the viscosity of the melt can lead to rejects that are not taken into account. Many processors are asking themselves how the new dynamic process control can be integrated into a validation strategy for the manufacture of medical technology products in compliance with current laws and standards. The key to this lies in the definition of process windows and the validation of these process areas.
Engel iQ weight control offers the possibility of limiting the scope of readjustment. Based on experience or test results, limit values are determined for the readjustable parameters switchover point, injection profile and holding pressure, respectively, and are stored in the control system. This ensures that the process parameters do not fall outside of the validated range despite dynamic process control, and that the process complies with the regulatory requirements.
Adapting the validation strategy to the product
First, the product requirements must be defined on the basis of measurable acceptance criteria. This is usually done on the basis of the risk analysis and is described in a Validation Master Plan (VMP). The VMP contains the validation strategy of a company and should clearly define the key elements of the qualification and validation program. To this end, the VMP must describe very specifically which validation principles are implemented in the company and how, and which persons assume responsibility at which level and in what form. This task should be performed by a group of experts, known as the task force, consisting of product and process engineers from the plastics processor.
Every product has Critical Quality Attributes (CQA), which in injection moulding production can be things such as a linear measure or the surface quality. In the validation, it is necessary to find the corresponding Critical Process Parameters (CPP) that affect the CQA. The experts define these critical injection moulding parameters on the basis of data sheets and figures based on experience with comparable injection moulding processes. In the case of critical components such as functional elements of a drug delivery system, the statistical Design of Experiments (DoE) is used to determine the process limits. For the majority of applications, simplified planning based on empirical values is sufficient to define a permitted parameter window. If the CQA are within the accepted limits, parameter ranges in which the process can be adapted can be set. In addition, the stability of the process is examined in this phase.
Controlling process parameters in real-time
The iQ weight control assistance system is real-time control software that adjusts process parameters during the running cycle to ensure consistently high component quality. The software compares the injection pressure above the screw position with a reference pressure curve and identifies deviations in injection volume and viscosity. The automatic adjustment of the switchover point, injection profile and holding pressure compensates for target deviations shot by shot. Consequently, the switchover point and holding pressure level must be defined as CPP in the validation strategy.
The limit values for the switchover point and holding pressure determined in the DoE are adopted in the CC300 controller of the Engel injection moulding machine as the limit value for process control with the aid of iQ weight control. If it is necessary to regulate the parameters outside of the validated limits in order to achieve the specified product quality, a corresponding procedure can be defined in the control system. For example, the respective shot can be declared as scrap or the production process can be stopped if the limit values are permanently exceeded. Simplified rules are also possible. For example, by keeping the switchover point constant and adjusting the holding pressure, or vice versa, keeping the holding pressure constant and adjusting the switchover point.
The validation strategy described makes it possible to use intelligent assistance systems in medical technology as well, in order to further increase process consistency and process reliability. This allows quality fluctuations of the raw material and changes in ambient conditions to be dynamically and reliably compensated for in the validated process. Using simple logic, the innovative algorithms employed by intelligent assistance systems can be integrated into the validation strategy.
iQ weight control
Producing moulded parts of a consistently high quality shot by shot is the aim of every processor. However, this will not be achieved by simply using a precise injection moulding machine. Even minor changes in ambient conditions or in raw materials and wear have an effect and may require the readjustment of parameters. The iQ weight control software makes it possible to automatically recognise deviations and compensate for them in the same shot. In this way, process consistency and reproducibility are increased and rejects are drastically reduced. The result is higher productivity with consistently high product quality.
Intelligent assistance is a key feature of the smart factory as described by the objective of industry 4.0. Engel was quick to focus on the trend towards digitalisation and networking of production processes, and offers a range of mature and repeatedly proven products for this purpose. The modularity of Engel’s inject 4.0 approach makes it especially easy for plastics processors to utilise the new possibilities. Even individual solutions like iQ weight control provide a huge benefit.